Ultimate Active Snow Foam

Information

Fireball Ultimate Active Snow Foam is a non-contact, thick foam pre-wash intended to help lift away heavy dirt, grime and contaminants before the wash process. Using a pre-wash foam such as Ultimate Active Snow Foam greatly reduces the risk of introducing swirls or scratches to the paintwork; and makes the wash process even more thorough - penetrating into areas that normal washing cannot reach.

Fireball Ultimate Active Snow Foam is pH neutral and will not harm any existing coatings or sealants you've applied. Ultimate Active Snow Foam presents excellent value for money too with a dilution ratio of 1:20 to 1:25; which is far more concentrated than the other competitors on the market.

Available Sizes

  • 100ml

  • 1000ml

  • 4000ml

Product Instructions

  • You can use Ultimate Active Snow Foam through a foam lance or pump sprayer/spray bottle. Since this formula is pH neutral it is safe for all surfaces.

    Apply Ultimate Active Snow Foam to a cool surface in a shaded area. Do not apply to a hot car. We recommend applying dry (without rinsing the car first) as this way the Snow Foam will start to work the heavy grime without being diluted down.

    Foam Lance
    Applying this product through a foam lance should be done with a dilution ration between 1:20 to 1:25. This equates to 40-50ml of Ultimate Active Snow Foam to a 1L foam lance. Any quality foam lance will product a thick foam with this dilution. For basic non-adjustable foam lances or hose foam lances you may need to use a bit more product. Allow the product to dwell on your vehicle for up to 5 minutes and rinse thoroughly - working from the bottom upwards for maximum effect. If you see the product drying up rinse it off immediately.

    Pump Sprayer/Spray Bottle
    Ultimate Active Snow Foam retains it's cleaning abilities even through a pump sprayer or standard spray bottle - however you will not get a thick foaming action like when used through a foam lance. Follow the same dilution ration between 1:20 to 1:25 and spray onto a cool surface in the shade. Allow the product to dwell on your vehicle for up to 5 minutes and rinse thoroughly - working from the bottom upwards for maximum effect. If you see the product drying up rinse it off immediately.


Related

Products